Razer GreenSwich issue in BlackWidow keyboard

Recently, I got a used Razer BLACKWIDOW Ultimate 2014 mechanical keyboard with the fancy Razer greenswitches inside. The keyboard looks awesome and I really like the illuminated keys too. I'm not a person who likes the lound, clicking sounds that this switches are make when you press them down but I decided to give it a try. Sadly, the smile in my face went away as soon as I plugged the keyboard in and started typing on it. Every second or third character was doubled or missed on the screen of my computer. Something was wrong for sure with the keys, this issue is called scattering by the way. Actually I know that before I bought the keyboard and this is why I was bought it. There was nothing left, time to investigate the source of this issue.

After a few phillips head screws I got inside the keyboard, and I desoldered some of the failed switches.
The switch itself was easily disassemblable, 2 securing on each side. The problem was obvious after I looked inside the switch, corroded contacts, simple and deadly.

Some polishing fixed the conductor surface but the question was how long the switch can work before failing again. I don't understand why the surface aren't covered with some kind of anti corrosion layers or any other method for countering this problem. The fact may sounds good like that the fix is not a big deal, but think about it. I have to desolder, disassemble, clean, reassemble and soldering back every single switch in the keyboard.

Comments

Journey with AllWinner A31 SoC a.k.a. born to die

!!!Allwinner A31!!! Quad-Core 64 Bit ultra cheap SoC for everyone!! Yeah sound good...but the truth are awful is some case . First of all do you know about the Banana Pi M2?The Banana Pi M1 (A20) was the killer of the first generation Raspberry pi . After the second generation Rpi was released the Bpi m2 was released too . But where is it ? The Bpi m2 was a huge fail (M3 was changed the M2 very soon) . Nobody care about the A31 SoC linux support . No community,no projects,hack or any interesting thing about this mini ARM board. And what about the android support? Little bit better but not in all case. My new target is a A31 SoC based tablet with nice screen and big battery . But something wrong because I can't turn on.And my journey started here. I took it apart and try to locating the wrong parts.I started on the power rails : Sorted Main Board WorkBench APX221 is a dedicated Power Management Unit for A31 SoC. You can find a lot of informations on sunxi linux...

PCB Plotter a.k.a. Direct Ink To PCB

The simples method to manufacturing PCBs at home is the toner trasfer method.But the laser printer is the most important a part of this technic and the laser printer is expensive stuff for only printing some PCB / month. The cheapest method to manufacturing PCBs at home is using alcoholic pen and drawing the traces with your own hands . But our hands resolution or the precision is not enough in most case. The PCB plotter machine with CNC controlling are the solution of this problem. I spend my last weeks to build this PCB plotter machine from 2 CDROM driver and a floppy driver. The parameters: 38mm*38mm Workspace (enough in most case) 0.0735 mm / steep (in halfsteeping mode) Parts that is used: As I said : 2 CDROM and 1 Floppy driver 3 * L293 Dual Full Bridge Motor Driver IC Power supply of course ATMEGA88 and USB2Serial bridge Some wires and pin headers The full cost is about 15$!! The manufacturing flow I using Eagle Cad for design the circuits a...

Fixing cracked solder balls under a BGA package

I got another pack of failed Xbox One controllers. Most of them had classic problems like broken LT frames,(which by the way I could not find anywhere) broken analog sticks and broken internal board-to-board connectors. I noticed that one of these controllers was the strangest of all. Everything working fine with this controller except the LT and the Y axis of the left analog stick. I walked through my regular troubleshooting process and I didn't find anything unusual wrong. It discovered later that was a cracked solder ball under the main controller chip. The crack was probably caused by a strong external force like a drop or a bend. As I continued repairing this poor gizmo, I realized if I pushed the IC to the board with my finger I get the right values on my tester and everything seems to work as it should. This ment that the cracked balls maybe fixable by a reflow so I reflowed the chip but it did not worked. I wanted to try to fix it by doing a reball, but I don't have p...

Life on FR4

Search This Blog